ATTENTION

Installation of this product requires some professional knowledge related to vehicles or electrical systems, or should be conducted under the guidance of a professional.

1. The hardwire kit needs to be connected into the vehicle's fuse box.
2. Please ensure your vehicle's fuse box is located near the driver's seat.
3. Ensure that your vehicle has the Acc On/Off signal.

You can obtain relevant information through professional research or consult professionals at a 4S store.

STEP 2

Use a multimeter to test the fuse

identify a fuse that provides continuous power even when the vehicle engine is off!

Note: Eusure the voltage is not lower than 11.8v

STEP 3

Take out and tie the red VCC+ wire to this fuse

Note: The fuse color and wire color may vary depending on the vehicle.

• Turn on engine, and the dash cam should startup normally.

• Access the 'device setting' through 70mai APP, and you should be able to activate the parking surveillance features.

• Switch off your car, and the dash cam should display or announce 'Entering the parking surveillance mode' or 'Entering time-lapse mode!

• If the dash cam has entered parking surveillance mode, restart the engine, and the dash cam should turn on normally.
  

When suspicious person remain in the cam's field of view for a certain time, the dash cam will automatically record.

After recording is completed, you will receive an alert notification.

Click to view the recording.